شرکت IFM با تولید طیف گسترده ای از سنسور های فشار در مدل های مختلف توانسته است نیاز مصرف کنندگان را در صنایع مختلف تامین کند. از اینرو سنسور های فشارIFM به دلیل تنوع در ابعاد ، ساختار و تکنولوژی می تواند پاسخ گوی نیاز صنایع مختلف باشد. شرکت الکترو صنعت هوشمند بعنوان نمایندگی IFM آماده همکاری با صنعتگران و همکاران گرامی باشد.
| Product characteristics | |||||||
|---|---|---|---|---|---|---|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||
| Measuring range |
|
||||||
| Process connection | threaded connection G 1/4 internal thread | ||||||
| Application | |||||||
| Special feature | Gold-plated contacts | ||||||
| Measuring element | ceramic-capacitive pressure measuring cell | ||||||
| Application | for industrial applications | ||||||
| Media | Liquids | ||||||
| Conditionally suitable for | use in gases at pressures > 25 bar only on request | ||||||
| Medium temperature [°C] | -25…80 | ||||||
| Min. bursting pressure |
|
||||||
| Pressure rating |
|
||||||
| Vacuum resistance [mbar] | -1000 | ||||||
| Type of pressure | relative pressure | ||||||
| Electrical data | |||||||
| Operating voltage [V] | 18…30 DC; (to SELV/PELV) | ||||||
| Current consumption [mA] | < 35 | ||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||
| Protection class | III | ||||||
| Reverse polarity protection | yes | ||||||
| Power-on delay time [s] | 0.3 | ||||||
| Integrated watchdog | yes | ||||||
| Inputs / outputs | |||||||
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||
| Outputs | |||||||
| Total number of outputs | 2 | ||||||
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | ||||||
| Electrical design | PNP/NPN | ||||||
| Number of digital outputs | 2 | ||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||
| Permanent current rating of switching output DC [mA] | 250 | ||||||
| Switching frequency DC [Hz] | < 500 | ||||||
| Number of analogue outputs | 1 | ||||||
| Analogue current output [mA] | 4…20; (scalable 1:5) | ||||||
| Max. load [Ω] | 500 | ||||||
| Analogue voltage output [V] | 0…10; (scalable 1:5) | ||||||
| Min. load resistance [Ω] | 2000 | ||||||
| Short-circuit protection | yes | ||||||
| Type of short-circuit protection | pulsed | ||||||
| Overload protection | yes | ||||||
| Measuring/setting range | |||||||
| Measuring range |
|
||||||
| Set point SP |
|
||||||
| Reset point rP |
|
||||||
| Analogue start point |
|
||||||
| Analogue end point |
|
||||||
| In steps of |
|
||||||
| Accuracy / deviations | |||||||
| Notes on the accuracy / deviation | switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1% | ||||||
| Switch point accuracy [% of the span] | < ± 0,4; (Turn down 1:1) | ||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | ||||||
| Characteristics deviation [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting) | ||||||
| Hysteresis deviation [% of the span] | < ± 0,1; (Turn down 1:1) | ||||||
| Long-term stability [% of the span] | < ± 0,05; (Turn down 1:1; per 6 months) | ||||||
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (-0…80 °C) | ||||||
| Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (-0…80 °C) | ||||||
| Response times | |||||||
| Response time [ms] | < 1.5 | ||||||
| Delay time programmable dS, dr [s] | 0…50 | ||||||
| Damping process value dAP [s] | 0…4 | ||||||
| Damping for the analogue output dAA [s] | 0…4 | ||||||
| Max. response time analogue output [ms] | 3 | ||||||
| Software / programming | |||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output | ||||||
| Interfaces | |||||||
| Communication interface | IO-Link | ||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||
| IO-Link revision | 1.1 | ||||||
| SDCI standard | IEC 61131-9 | ||||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||||
| SIO mode | yes | ||||||
| Required master port type | A | ||||||
| Process data analogue | 1 | ||||||
| Process data binary | 2 | ||||||
| Min. process cycle time [ms] | 2.3 | ||||||
| Supported DeviceIDs |
|
||||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -25…80 | ||||||
| Storage temperature [°C] | -40…100 | ||||||
| Protection | IP 65; IP 67 | ||||||
| Tests / approvals | |||||||
| EMC |
|
||||||
| Shock resistance |
|
||||||
| Vibration resistance |
|
||||||
| MTTF [years] | 161 | ||||||
| UL approval |
|
||||||
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request | ||||||
| Mechanical data | |||||||
| Weight [g] | 280.5 | ||||||
| Materials | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC | ||||||
| Materials (wetted parts) | stainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM | ||||||
| Min. pressure cycles | 100 million | ||||||
| Tightening torque [Nm] | 25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating) | ||||||
| Process connection | threaded connection G 1/4 internal thread | ||||||
| Restrictor element integrated | no (can be retrofitted) | ||||||
| Displays / operating elements | |||||||
| Display |
|
||||||
| Remarks | |||||||
| Pack quantity | 1 pcs. | ||||||
| Electrical connection | |||||||
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated | ||||||
Reviews
There are no reviews yet.